產品：抗生素截止閥丶抗生素截止閥設備

截止閥在管路中主要作切斷用。有以下優點：
    1．  在開閉過程中密封面的摩擦力比閘閥小，耐磨。
    2．  開啟高度小。
    3．  通常只有一個密封面，制造工藝好，便于維修。
    截止閥使用較為普遍，但由于開閉力矩較大，結構長度較長，一般公稱通徑都限制在DN≤200mm以下。（）

截止閥的流體阻力損失較大。因而限制了截止閥更廣泛的使用。
    截止閥的種類很多，根據閥桿上螺紋的位置可分：
    一、上螺紋閥桿截止閥
    截止閥閥桿的螺紋在閥體的外面。其優點是閥桿不受介質侵蝕，便于潤滑，此種結構采用比較普遍。
    二、下螺紋閥桿截止閥
    截止閥閥桿的螺紋在閥體內。這種結構閥桿螺紋與介質直接接觸，易受侵蝕，并無法潤滑。此種結構用于小口徑和溫度不高的地方。
    根據截止閥的通道方向，又可分為；直通式截止閥，角式截止閥和三通式截止閥，后兩種截止閥通常做改變介質流向和分配介質用。

Products: Antibiotic globe valve, antibiotic globe valve equipment

The globe valve is mainly used for cutting off in the pipeline. Has the following advantages:

    1. During the opening and closing process, the friction force of the sealing surface is smaller than that of the gate valve, and it is wear-resistant.

    2. The opening height is small.

    3. Usually there is only one sealing surface, the manufacturing process is good, and it is easy to maintain.

    Globe valves are commonly used, but due to the large opening and closing torque and long structure length, the nominal diameter is generally limited to DN≤200mm. ( )

The fluid resistance loss of the globe valve is relatively large. Therefore, the wider use of globe valves is limited.

    There are many types of globe valves, which can be divided according to the position of the thread on the valve stem:

    1. Upper threaded stem globe valve

    The thread of the globe valve stem is on the outside of the valve body. The advantage is that the valve stem is not eroded by the medium and is easy to lubricate. This structure is relatively common.

    2. Lower threaded stem globe valve

    The thread of the globe valve stem is in the valve body. The stem thread of this structure is in direct contact with the medium, which is easily corroded and cannot be lubricated. This structure is used in places with small diameters and low temperatures.

    According to the channel direction of the globe valve, it can be divided into: straight-through globe valve, angle-type globe valve and three-way globe valve. The latter two globe valves are usually used to change the flow direction of the medium and distribute the medium.

產品圖片：米勒衛生級不銹鋼排氣抗生素閥門生產廠家

公司簡介：

安徽利勒潔凈設備科技有限公司是國內專業生產制造潔凈衛生級閥門管件，主要應用于食品機械行業、制藥機械行業、乳制品行業、釀酒飲料行業以及精細化工等行業高精度衛生級流體設備的專業生產廠家，產品規格齊全；產品主要有：米勒衛生級不銹鋼排氣抗生素閥門生產廠家，無菌隔膜閥，卡箍直通隔膜閥，三通隔膜閥，法蘭隔膜閥，氣動隔膜閥，U型隔膜閥，罐底隔膜閥 ；無菌球閥，卡箍直通球閥，螺紋球閥，焊接球閥，氣動球閥，法蘭球閥，電動球閥；衛生級蝶閥，焊接蝶閥，卡箍直通蝶閥，螺紋蝶閥，法蘭蝶閥，氣動蝶閥，電動蝶閥；不銹鋼衛生泵，不銹鋼衛生級離心泵，不銹鋼衛生自吸泵，不銹鋼酒精防爆泵，衛生奶泵，衛生飲料泵；止回閥，過濾器、呼吸器、換向閥、防混閥、安全閥；衛生級不銹鋼管件，焊接彎頭，快裝彎頭，不銹鋼三通，快裝三通，四通，真空彎頭，大小頭；罐頂組件系列，不銹鋼儲罐，發酵罐，不銹鋼衛生級人孔，清洗球/器，視鏡燈，排氣閥等其它非標產品生產加工；我們竭誠為您服務.